15 Umbrella Stands for Small Entryways That Catch the Drips
A wet umbrella dropped by the door takes up more room than it should. It leans, slides, and leaves a puddle on the one patch of floor everyone has to cross.
In a tight entry, the fix has to be small first and useful second. Every stand below was picked on its footprint, so the best umbrella stands for small entryways here start at about five inches deep and stay narrow against the wall.
Height and water handling come next. A taller stand keeps long umbrellas upright, and a tray keeps drips off the floor. For the rest of a tight entry setup, see these entryway ideas for apartments with no hallway.
Check the footprint figures against your own door swing before you choose.
A stand that fits on paper can still block a door that opens flat against the wall. Measure the depth from the wall, not just the width along it.
This post contains affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. See our Affiliate Disclosure.
1. SONGMICS Umbrella Stand ULUC02AG — a slim rectangular steel stand with a lift out drip tray
This rectangular stand measures 4.7 inches deep, 11 inches wide and 16.1 inches tall, per the listing. That shallow depth is the point, since it sits flat against a wall without pushing into the walkway.
The body is steel with plastic parts, and the listing describes an openwork hollow design. Open sides let air move around wet umbrellas, so they dry in the stand instead of staying damp in a closed bin.
A detachable plastic drip tray sits in the base and lifts out for emptying.
Four hooks are included for folding umbrellas, and the listing also names canes and wrapping paper as fits. The watch-for is height, at 16.1 inches long umbrellas lean more than in taller stands.
2. Yamazaki Tower Slim Umbrella Stand — a narrow steel and silicone stand for the tightest wall strip
Retailer listings for this Tower stand give a footprint of 12 by 22 cm, with a height of 50 cm. That is about 4.7 inches deep, which is as slim as a full height stand gets.
The frame is steel with silicone parts, per the listing. It suits the same kind of narrow wall strip as the best slim shoe cabinets for small entryways, and the two can share one short wall.
Listings describe a removable drip tray, so water collects in the base and lifts out for emptying.
One retailer listing states room for up to eight umbrellas, a maker side figure worth treating as a maximum. The watch-for is width, since slim slots suit neat stick umbrellas better than bulky golf umbrellas.
3. SONGMICS Umbrella Stand ULUC026B33 — a square steel stand with a detachable tray and four hooks
This square model measures 6.1 by 6.1 inches at the base and 16.1 inches tall, per the listing. A square footprint of that size tucks into a corner beside the door without spreading across the floor.
The listing gives the materials as alloy steel and plastic, with a hollow design. Four removable hooks come in the box, and they give folding umbrellas a place to hang by the strap instead of sinking inside.
Water handling is a detachable plastic drip tray in the base, which lifts out to empty at the sink. The watch-for is the square shape itself, since sharp corners suit a true corner spot better than a spot mid wall where people brush past.
4. AWTATOS Umbrella Holder — a tall narrow grid stand for households with many long umbrellas
The AWTATOS stand measures 11.81 inches long, 5.75 inches deep and 25.19 inches tall, per the listing. The long, shallow shape runs along a wall, and the extra height keeps long umbrellas standing straighter.
The brand states room for 6 to 8 large umbrellas, plus up to 5 folding umbrellas on the hooks. Treat that as a maker figure for neatly furled umbrellas, not a promise for bulky ones left open to dry.
A removable drip tray sits under the body, and the grid floor holds umbrella tips in place.
The tips stay apart instead of sliding together in one corner. The watch-for is height, since at over 25 inches this shape reads as furniture in a tiny entry.
5. Umbra Bellwood Umbrella Stand — a round resin base stand with a steel ring and wood handle
Retailer specs put this stand at about 8.75 inches across and 26.75 inches tall. The round base is resin, which the brand describes as water resistant and made to prevent rusting at the wettest point.
A steel upper ring holds the umbrellas, and a curved wood veneer handle runs up one side for moving the stand. Retailer copy states four slots for tall umbrellas and two hooks inside the ring for small umbrellas.
For water, the resin base has a raised edge, stated at 2 inches in retailer copy, to hold drips in the base.
The watch-for is that the base is fixed, not a lift out tray. It is emptied by wiping or tipping rather than carrying a tray to the sink.
6. Mind Reader Umbrella Stand — a metal mesh basket stand with a lipped base
This mesh stand measures 10.25 by 10.25 inches and 19.5 inches tall, per the listing. That is the widest footprint in this list, so it suits a corner with a little more floor to spare.
The body is metal mesh, and the brand copy says the mesh allows quick drying. The same copy names canes, mailing tubes and office supplies as other uses, which suits a stand that doubles for wrapping paper rolls.
For water, the listing describes a bottom lip that contains water or debris. The watch-for is clear, since there is no removable drip tray here, only that lipped base, so heavy rain days may call for a mat under the stand as a backup.
7. Mango Steam Zig-Zag Umbrella Holder — a compact square steel holder with a removable drip tray
This square holder measures 6 by 6 inches and 19.25 inches tall, per the listing. A six inch square base is easy to place, and the taller body gives long umbrellas more support than the short bins.
The material is alloy steel, and the body is built in an open zig zag pattern. The openwork keeps umbrellas, walking sticks and canes close at hand, per the brand copy, and lets air reach wet fabric.
A drip tray sits at the base, and the brand says it is easily removable to clean and drain.
The watch-for is the six inch opening, which limits how many umbrellas fit at once. This is a stand for a few daily umbrellas rather than a crowd of guests.
8. WAOHANAZ Rattan Umbrella Stand — a hand woven rattan stand on a steel frame
This woven stand measures 7.5 by 7.5 inches and 16.5 inches tall, per the listing. The square shape sits neatly in a corner, and the rattan body brings a warmer look than the metal stands around it.
The listing describes the stand as hand woven rattan reinforced by a steel frame. That frame is what keeps the woven body holding its shape when umbrellas are pushed in and pulled out each day.
A detachable plastic drip tray collects water in the base, and four removable hooks hang folding umbrellas.
The brand notes the hooks can hang inward to keep drips over the tray. The watch-for is the rattan itself, which needs that tray in place so the woven body stays dry.
9. JAJAGOU Umbrella Stand — a long low profile steel frame stand with hooks for keys and bags
This stand measures 14.37 inches long, 7.48 inches wide and 24.4 inches tall, per the listing. The length runs along the wall while the depth stays under eight inches, so the walkway stays clear.
The frame is alloy steel with plastic parts, per the listing. Metal hooks on the stand can hang keys, bags and folding umbrellas, which adds storage for the small items that gather by a door.
A built in drip tray is detachable, so it lifts out for emptying and cleaning. The listing also names canes and walking sticks among the fits for this frame.
The watch-for is total length, since at over 14 inches this is the longest footprint here, so measure the wall run and the door swing before choosing it.
10. GlikCeil Rattan Umbrella Holder — a square rattan and metal basket with a plastic water catch tray
This holder measures about 9 by 9 inches and 20.5 inches tall, per the brand specs in the listing. The extra height over the shorter woven stands helps tall umbrellas and walking canes stand upright.
Materials are rattan and metal, per the listing, in a square basket shape. The listing names tall umbrellas and canes as the intended fits, and the open woven sides let air move through.
A drip tray comes in the box, described by the brand as a plastic water catch for keeping floors dry.
The watch-for is sizing, since the listing notes the size was measured by hand and may vary slightly. Allow a small margin against your measured space.
11. SONGMICS Umbrella Stand ULUC022B01 — a round steel stand with long and short hooks
This round model measures 6.7 by 6.7 inches and 16.1 inches tall, per the listing. A round base of that size fits a corner where a square stand would waste the angled space behind it.
The listing gives steel and plastic as the materials. Four hooks are included, split by the brand into 2 long hooks and 2 short hooks, so long and folding umbrellas each get a hanging option.
The brand states the stand holds at least 4 long and 2 short umbrellas at the same time.
A detachable drip tray guards the floor below them. The watch-for is that stated mix, since it is also the practical ceiling for a stand of this size.
12. XINWXSS Umbrella Stand — a tall metal stand with an adjustable shelf for small umbrellas
This metal stand measures 8 inches deep, 8.2 inches wide and 26 inches tall, per the listing. It is the tallest pick here, which suits long stick umbrellas that lean out of shorter stands.
The listing names an adjustable shelf as a special feature, made for use with small umbrellas. A shelf solves the folding umbrella problem in a tall body, since short umbrellas rest on it instead of dropping to the bottom.
A bottom drip tray is named in the listing title and catches water under the stand.
The watch-for is height against footprint, since a tall stand on an eight inch base needs support nearby. Place it against a wall or in a corner where it cannot be knocked.
13. Hacaroa Metal Round Umbrella Stand Rack — a narrow round metal bin with a hollow out design
This round rack measures 6.7 inches across and 16.5 inches tall, per the listing. That narrow profile is the appeal, since it slides into the small gap beside a door or a cabinet.
The brand copy describes the metal body as strong, with a rust resistant coating, and a hollow out design. The open pattern provides ventilation, which the brand says helps umbrellas dry quickly after use.
The watch-for is water handling, since the listing states no drip tray for this rack. Plan a washable mat or a separate tray under it from day one, or drips will reach the floorboards.
The brand copy also names canes, walking sticks and wrapping paper as other uses for the rack.
14. SONGMICS Umbrella Stand ULUC029B01 — a taller round steel stand with a detachable drip tray
This round stand measures 6.9 by 6.9 inches and 19.3 inches tall, per the listing. It keeps the small round footprint of the shorter round models and adds height for longer umbrellas.
Materials are steel and ABS plastic, per the listing, in a matte black finish. The round shape has no corners, which suits a spot where bags and coats pass close by the door.
A detachable drip tray is included, along with instructions, per the listing. The listing gives the finish simply as steel, in a matte black color for this model.
The watch-for is setup and storage, since the listing states assembly is required, and no hooks are listed in the box, so folding umbrellas sit inside the body with the long ones.
15. vidaXL Umbrella Stand — a square metal stand with decorative inlays for indoor use
Retailer specs for this stand give 15.5 by 15.5 cm at the base and 49 cm tall. That works out to about 6.1 inches square and 19.3 inches tall, a compact footprint with useful height.
The stand is metal with decorative inlays, per the retailer listing, in a black finish. The retailer states indoor use only, and assembly is required, with the stand arriving as a flat pack.
The watch-for is water handling, since the retailer specs state no drip tray for this model. Like the open rack above, it needs a tray or mat under it on wet days. Check the assembled size against your corner before the first rainy week arrives.
Start with the footprint, then pick the tray style that suits your floor.
Lift out trays are easiest to empty, fixed bases need a wipe, and open racks need a mat below. Any of these best umbrella stands for small entryways picks will hold its corner without crowding the door.
Finish the landing zone with the seating and shoe storage in these best entryway benches with shoe storage, and keep meltwater and mud in check with the best boot trays for entryways from the same batch.
